Which Renault Models Are Fully Supported by Renolink?
If you’re planning to use Renolink 2.12 for key programming, ECU coding, airbag resets, or immobilizer functions, the first question you might ask is — which Renault models are fully supported?
This guide covers all supported Renault and Dacia vehicles, their years, and the key modules Renolink can access. Whether you’re a DIY enthusiast or a professional technician, verifying compatibility first can save hours of trial and error.
Renolink supports a wide range of modules including:
- ECU (Engine Control Unit)
- UCH (Central Electronics)
- BCM (Body Control Module)
- Airbag Modules
- ABS/ESP Systems
- Dashboard & Cluster
- Key & Immobilizer Systems
Ready to dive into the list? Let’s go. ✅
Renault Vehicles Compatible with Renolink 🚗
This list includes models with proven compatibility via Renolink 2.12 and above, tested for various coding and diagnostic functions.
Clio Series
- Renault Clio 2 (2001–2008) – ECU, UCH, Airbag, Key Coding
- Renault Clio 3 (2005–2014) – Full ECU/UCH/ABS/Key/Cluster support
- Renault Clio 4 (2012–2019) – Supports key programming and ECU diagnostics
- Renault Clio 5 (2019–2022) – Partial support; limited key coding functions
Logan & Sandero
- Logan I & II (2004–2020) – ECU, UCH, airbag crash reset, immobilizer
- Sandero I & II (2008–2020) – Includes cluster and comfort features activation
Megane Series
- Megane 2 (2002–2009) – Full module support including Airbag and ABS
- Megane 3 (2008–2015) – Advanced compatibility including dashboard and BCM
- Megane 4 (2016–2021) – Partial support; diagnostic-only for some ECUs
Scenic Series
- Scenic 2 (2003–2009) – Common for airbag crash reset, VIN change
- Scenic 3 (2009–2016) – ECU replacement coding, key programming
- Scenic 4 (2016–2021) – Diagnostic and reset available; limited EEPROM edit
Captur
- Captur 1 (2013–2019) – Full Renolink access for key coding, ECU, and BCM
- Captur 2 (2020–present) – Partial/limited coding
Laguna
- Laguna 2 (2001–2007) – Key coding, dashboard config, UCH
- Laguna 3 (2007–2015) – All major modules supported
Kangoo
- Kangoo 1 & 2 (2003–2019) – Full vehicle access, airbag reset
- Kangoo ZE (Electric) – Partial ECU-only support; battery monitor limited
Twingo
- Twingo 2 (2007–2014) – Key and airbag module coding support
- Twingo 3 (2014–2020) – Basic diagnostics only
Trafic & Master
- Trafic II (2001–2014) – ECU and immobilizer functions supported
- Trafic III (2014–2020) – Limited read functions only
- Renault Master II/III (2001–2020) – UCH, airbag, VIN change
Duster & Koleos
- Dacia Duster 1 & 2 (2010–2020) – Key programming, UCH config, ABS
- Renault Koleos (2008–2016) – Full support including VIN edit
Electric Renaults
- Renault Zoe (1st Gen) – Basic ECU connection confirmed, no advanced programming
- Fluence ZE – Partial support only for diagnostics
Dacia Models Also Supported by Renolink 🔧
Renolink works extremely well with Dacia models (many share exact ECUs with Renault counterparts). Here’s what’s covered:
Model | Year Range | Coverage Notes |
---|---|---|
Dacia Logan | 2004–2020 | Full ECU, airbag, immobilizer supported |
Dacia Sandero | 2008–2020 | Key programming, dashboard, UCH coding |
Dacia Duster | 2010–2021 | ECU/ABS reset, VIN change, key add |
Dacia Lodgy | 2012–2020 | Airbag light reset, diagnostic access |
Dacia Dokker | 2012–2020 | Advanced UCH, ECU, immobilizer access |
What Modules Does Renolink Access? 🧠
Here’s a quick overview of the major systems Renolink can communicate with:
- ✔️ ECU (Engine & Injection Systems) – Read/write EEPROM, change VIN, clone
- ✔️ UCH (Central Locking & Comfort Module) – Key coding, feature activation
- ✔️ Airbag Module ECU – Reset stored crash data, clear SRS faults
- ✔️ ABS/ESP Systems – Module readout, fault clearing
- ✔️ Instrument Cluster – LED config, mileage sync (model-dependent)
- ✔️ Body Control Module (BCM) – Activation of hidden features
Not all modules are fully editable on newer models – but Renolink still supports EEPROM reading and module-level diagnostics on most.
How to Verify if Your Renault is Compatible 🧐
If you’re unsure whether Renolink supports your specific vehicle, follow these steps:
- Check the vehicle year — Best results between 2005–2020
- Look for the exact control unit name (e.g., UCH Johnson Controls)
- Review the built-in module list via Renolink after connection
- Refer to the official tutorials page
- Or ask our support team here for confirmation
Still shopping? Start with one of the best-supported models like Clio 3 or Megane 3 — ideal for learning and testing features.
Final Thoughts
When it comes to Renault diagnostics and programming, Renolink remains the top choice for full-feature access without dealer tools.
By supporting a wide range of models — from Clio and Megane to Dacia Duster and Lodgy — Renolink 2.12 gives professional control in a home-friendly interface.
Remember to always:
- Confirm compatibility based on model + year
- Use genuine Renolink software and tools
- Work safely and back up EEPROM before writing
Need a ready-to-go bundle?
👉 Shop genuine Renolink kits with activation
👉 Not sure how to start? Follow our guides here
👉 Browse more articles and tips on the blog
Whether you’re coding keys, fixing airbags, or activating hidden features — Renolink has you covered. 🛠️🚗